Microcomputer controller with 8 wireless zones and 8 hardwired zones, keyboard programming, and liquid crystal display.
Alarm reporting through public telephone network to specific telephones, or to central monitoring stations in agreement with ADEMCO 4+2 or ADEMCO Contact ID.
Voice alarm to mobile phone or regular telephone.
Arm/disarm via SMS remote control, checking the control console status via SMS (Double encryption)
Alarm report via SMS message, zone SMS information can be updated
SMS interconnecting with the alarm centers, to control the mainframe
Can store up to five alarm phone numbers
Support eight user codes and a Installer Code
Arm/disarm and timed arm/disarm via remote control, local keyboard, or telephone line
Wired / wireless zone can be independently bypassed
Built-in relay output linked to long-distance telephone for remote control of other electrical appliances
Monitor the voice of the scene
Wireless detector code learned automatically with remote controller
Alarm report for telephone line failure or theft
Event reporting automatically for armed/disarmed, AC fault/recovery, control console battery voltage low/recovery, bypass, programming exit, detector faults, and GSM mobile phone module faults
Armed/disarmed, alarm/alarm failed, and the start-up information saved for review
|
² Alarm means of communication: Alarm information transmitted through the telephone network (PSTN)
² Programming:DA-238G LED / LCD keyboard programming
² Arm/disarm and timed arm/disarm: remote control, system keyboard, or telephone call, SMS
² Hardwired zone reaction time：50ms-750ms
² Wireless reception frequency: 315MHZ
² Voice recording：120s（24 Segment）
² Power Supply: AC 220V
² Backup Power: DC 12V 7Ah (Maintenance-free lead-acid battery)
² Maximum output power: DC 12V 1200mA
² Installation: hanging or embedded
² Weight (with battery): About 3Kg (6Kg)
² Host Size: 26.4 cm × 26.1cm × 8cm ( Excluding the antenna height)
|
